Linksys router to router vpn

A Virtual Private Network (VPN) is a connection that establishes a private network using which the user can send and receive the date securely between the two locations or networks through a tunnel.  A VPN acts as a connection between two different networks that allows the user to sent and receive private data securely over the internet.  

It can also be used to connects the two computers or networks and allows data to be shared between them as they were connected to the networks.  By encrypting the data sent between the two networks, the VPN connection is secured.  

For more information regarding the VPN router, you can search the web as http//linksyssmartwifi.com setup. 

The following are the four steps that you need to perform to set up a VPN network tunnel.  

•             Connecting the devices to the router.

•             Then, you need to verify the VPN settings on the two router.

•             Then you have to configure the tunnel settings on router A and router B.

The following are the various steps to verify the VPN settings on the two routers

•             First, you have to open the web browser on your computer and then type the web address as http //linksyssmartwifi.com setup.

•             Then, you have to access the web-based page setup of your router.  Please note, that if you are using Mac operating system to access the web-based setup page of the router, then the procedure varies a bit. You can search the internet for the settings of the Mac.

•             In the next step, you have to go to the Status and then Gateway. Make sure you note down the Internet/WAN IP address.

•             Make sure that the two routers have a different IP address.  The Local IP address of the Router A will be the Remote Secure Group for router B.  You can search the web address http //linksyssmartwifi.com setup for more information regarding the VPN Tunnel settings.

TP-Link TL WR841N WiFi router range in meters

TP-link is undoubtedly the world’s best brand for WLAN products for a long time. The hardware and firmware both have made it possible. The best of both these worlds, lead to manufacturing of routers such as Archer C60, Archer T2U, RE200, and the TL series.

TP-Link TL-WR841 is one such Wireless-N router from the tech giant. With an impressive wireless range of 70 meters provides fast and continuous Internet connectivity at speeds of 300mbps. The router supports latest Wi-Fi 802.11 b/g/n standards. TP-link offers excellent network security with some encryptions to increase the safety of your data. 

The router has been priced at around ₹ 1800 which is quite competitive regarding its features. The TL WR841N is equipped with two fixed high gain antennas, which ensure a longer Wireless range of 70 Meters. It has four Ethernet ports for wired connectivity each with 10/100 Mbps output. 

The router is made to be small, sleek and is ideal for mounting on a side wall or on a table which makes it easy to use both at home and small offices. It can be used for the various purpose, like Online Gaming, streaming HD videos, surveillance camera video streaming, or to make a VoIP call. The router comes integrated with the Parental control which can be accessed by visiting TP-Link WiFi setup.

The router weighs at 640 gm and supports IP QoS functions. This allows optimum utilization of whatever Bandwidth is available. It can also control Bandwidth to remove congestion. This also can be accessed on TP-Link WiFi setup.

The key feature of TP-Link TL WR841N remains its impressive 70-meter wireless range. Go for it.

Netgear ex6100 ac750 dual-band wifi range extender manual

The Netgearex6100 ac750 dual band w increases the range of the Wi-Fi network by enhancing the overall signal quality over the long distances.  You can also connect your router to the extender by using the Ethernet cable and then use the extender as an access point.

Installing the Wi-Fi Extender

 

•             First, place your extender in the same room as in which your Wi-Fi router is placed.

•             Then plug the extender into an electrical power supply outlet and wait for the LED lights to become solid green.  If the power LED does not light, then you have to press the Power button.

•             Then before proceeding further, you have to make sure that the switch on the extender is set to ON.  

Read Here:

Streaming Audio to Wireless and Powerline Music Extenders using Airplay Feature

Connecting to the Existing Network of Netgear ex6100 ac750 dual band w

You have to connect the extender to the existing Wi-Fi network to extend the range of your Wi-Fi network.  The following are the two ways to do it.  

a.            Connect with WPS

b.            Connect with genie Smart Setup

Connect with WPS

The secure Wi-Fi network that uses the Wi-Fi Protected Setup allows you to join the network without entering the network name and password.  The WPS button is a button on your router.  

The following are the various steps that allow you to connect to the WPS.

•             First, you have to press the WPS button that is present on either side of the extender. 

•             Then within 3 minutes, you have to press the WPS button on your router.  If the router link LED lights green and the WPS  LED on the extender lights solid green, then this means that your extender is connected to the existing Wi-Fi network.

•             Repeat the step 1 and 2 to connect to the extender to the 5 GHz band if your Wi-Fi router supports the 5 GHz band.

HTTP //Belkin.range n300 single band

Hey, guy what’s up! From my couple of days research, I have found that many of you are looking for How to Setting up the Belkin Wi-Fi Range Extender wirelessly. And still now if you are looking for the same thing then you are at the right post. Because in this article we are going to discuss How to set up BELKIN Range Extender wirelessly.

How to set up HTTP Belkin range n300 Range Extender Wirelessly.

•    At first, you have to plug in your Belkin range n300 Extender into a power outlet which is present within the range of your router's wireless network.

•    Now By using Wifi- capable device You will locate and connect to the Belkin.setup network. 

•    Now open any of the web browsers on to your computer such as opera mini, Google Chrome, Internet Explorer, etc. Then on the address bar of the web browser enter your BELKIN Router Default IP address bar. Then press Enter.

•    Now a new login page of your router will open where you have to enter Your Router Login details. (Username and Password).

•    Now select the Network Which you want to extend. Once done then click NEXT.

•    You can also extent second Network if you have Dual-Band Network, then you select the second network which you want to extend. Then Click NEXT once done.

•    Now you have to Review the Extended Network information.

In this above way, you will be able to set up your HTTP Belkin range n300 Extender. If you have been benefited after reading this article, then share this article help others also to know about this article from http://www.htpbekiin-range.com/ , those who are not able to Set up the Belkin Wi-Fi Range Extender wirelessly. Do follow us for the more latest update.