Linksys router to router vpn

A Virtual Private Network (VPN) is a connection that establishes a private network using which the user can send and receive the date securely between the two locations or networks through a tunnel.  A VPN acts as a connection between two different networks that allows the user to sent and receive private data securely over the internet.  

It can also be used to connects the two computers or networks and allows data to be shared between them as they were connected to the networks.  By encrypting the data sent between the two networks, the VPN connection is secured.  

For more information regarding the VPN router, you can search the web as http//linksyssmartwifi.com setup. 

The following are the four steps that you need to perform to set up a VPN network tunnel.  

•             Connecting the devices to the router.

•             Then, you need to verify the VPN settings on the two router.

•             Then you have to configure the tunnel settings on router A and router B.

The following are the various steps to verify the VPN settings on the two routers

•             First, you have to open the web browser on your computer and then type the web address as http //linksyssmartwifi.com setup.

•             Then, you have to access the web-based page setup of your router.  Please note, that if you are using Mac operating system to access the web-based setup page of the router, then the procedure varies a bit. You can search the internet for the settings of the Mac.

•             In the next step, you have to go to the Status and then Gateway. Make sure you note down the Internet/WAN IP address.

•             Make sure that the two routers have a different IP address.  The Local IP address of the Router A will be the Remote Secure Group for router B.  You can search the web address http //linksyssmartwifi.com setup for more information regarding the VPN Tunnel settings.